Print Center

< SETTINGS‎ | Printer‎ | Print Area‎ | Size and Coordinates
A screenshot of the Print Center setting as seen in MatterControl's SETTINGS pane.

Function

The position (X and Y coordinates) of the center of the print bed, in millimeters.

Cartesian printers: For printers with a rectangular bed, the origin is at the bottom left corner of the bed. The print center should be 1/2 the Bed Size.

Delta printers: For printers with a circular bed, the origin is in the middle of the circle. The print center should be 0, 0.

Parameters

  • millimeters (mm)

Example(s)

mm

In this example, the center of the print bed is 100 millimeters from the left side of the bed along the X axis and 75 millimeters from the bottom of the bed along the Y axis.

Print Center-ss-ex.png