Difference between revisions of "SETTINGS/Printer/Print Leveling"

Latest revision as of 18:33, 6 December 2016

The Print Leveling sub-category as shown in the MatterControl SETTINGS pane.

Print Leveling is a sub-category of Printer settings which deal with options for MatterControl's Software Print Leveling feature.

This section (Print Leveling) is not shown when Has Hardware Leveling is enabled as only one form of leveling can be used at a time.

@@ Line 1: / Line 1: @@
-{{Slice Settings Category|options for the [[MatterControl Automatic Bed Leveling feature|Automatic Print Leveling]]}}
+{{Slice Settings Category|options for [[OPTIONS/Software Print Leveling|MatterControl's Software Print Leveling feature]].
-== Sub-sections ==
+=== Restrictions ===
-=== Filament ===
+*This section (Print Leveling) is not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.}}
-<splist parent = Slice_Settings/Filament/Filament/Filament />
+== Sub-sections ==
-=== Extruder Temperature (C) ===
-<splist parent = Slice_Settings/Filament/Filament/Extruder Temperature (C) />
-=== Bed Temperature (C) ===
+=== [[SETTINGS/Printer/Print_Leveling/Machine_Settings|Machine Settings]] ===
-<splist parent = Slice_Settings/Filament/Filament/Bed Temperature (C) />
+<splist parent = SETTINGS/Printer/Print_Leveling/Machine_Settings />
-=== Retraction ===
+=== [[SETTINGS/Printer/Print_Leveling/Probe_Settings|Probe Settings]] ===
-<splist parent = Slice_Settings/Filament/Filament/Retraction />
+<splist parent = SETTINGS/Printer/Print_Leveling/Probe_Settings />