Open main menu

Changes

SETTINGS/Printer/Print Leveling

135 bytes added, 01:33, 7 December 2016
no edit summary
{{Slice Settings Category|options for the [[MatterControl Automatic Bed OPTIONS/Software Print Leveling feature|Automatic MatterControl's Software Print Levelingfeature]]}}.
== Sub-sections = Restrictions ===
=== Filament ===*This section (Print Leveling) is not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.}}
<splist parent = Slice_Settings/Filament/Filament/Filament /> =Sub-sections == Extruder Temperature (C) === <splist parent = Slice_Settings/Filament/Filament/Extruder Temperature (C) />
=== Bed Temperature (C) [[SETTINGS/Printer/Print_Leveling/Machine_Settings|Machine Settings]] ===
<splist parent = Slice_SettingsSETTINGS/FilamentPrinter/FilamentPrint_Leveling/Bed Temperature (C) Machine_Settings />
=== Retraction [[SETTINGS/Printer/Print_Leveling/Probe_Settings|Probe Settings]] ===
<splist parent = Slice_SettingsSETTINGS/FilamentPrinter/FilamentPrint_Leveling/Retraction Probe_Settings />