Difference between revisions of "SETTINGS/Printer/Print Leveling/Machine Settings/Leveling Positions"

From MatterControl Manual
Jump to: navigation, search
 
Line 3: Line 3:
 
|If set, these positions will be used when running the leveling solution. Leave empty for defaults.
 
|If set, these positions will be used when running the leveling solution. Leave empty for defaults.
  
This setting is only available if you have chosen either 3 Point Plane or 3x3 Mesh for your leveling solution.
+
This setting is only available if you have chosen either 3 Point Plane or 3x3 Mesh for your leveling solution.|*X and Y coordinates
  
 
=== Data Format ===
 
=== Data Format ===
  
X1,Y1:X2,Y2:...:Xn,Yn
+
==== 3 Point Plane ====
  
|*List of X and Y coordinates|
+
X1,Y1:X2,Y2:X3,Y3
  
}}
+
==== 3x3 Mesh ====
 +
 
 +
X1,Y1:X2,Y2:X3,Y3:X4,Y4:X5,Y5:X6,Y6:X7,Y7:X8,Y8:X9,Y9|In this example, the SPL wizard will run using the 3 Point Plane configuration at the points 4,7; 200,12; and 100,220}}

Latest revision as of 15:46, 1 August 2017

A screenshot of the Leveling Positions setting as seen in MatterControl's SETTINGS pane.

Function

If set, these positions will be used when running the leveling solution. Leave empty for defaults.

This setting is only available if you have chosen either 3 Point Plane or 3x3 Mesh for your leveling solution.

Parameters

  • X and Y coordinates

Data Format

3 Point Plane

X1,Y1:X2,Y2:X3,Y3

3x3 Mesh

X1,Y1:X2,Y2:X3,Y3:X4,Y4:X5,Y5:X6,Y6:X7,Y7:X8,Y8:X9,Y9

Example(s)

In this example, the SPL wizard will run using the 3 Point Plane configuration at the points 4,7; 200,12; and 100,220

Leveling Positions-ss-ex.png