Leveling Positions

< SETTINGS‎ | Printer‎ | Print Leveling‎ | Machine Settings
A screenshot of the Leveling Positions setting as seen in MatterControl's SETTINGS pane.

Function

If set, these positions will be used when running the leveling solution. Leave empty for defaults.

This setting is only available if you have chosen either 3 Point Plane or 3x3 Mesh for your leveling solution.

Parameters

  • X and Y coordinates

Data Format

3 Point Plane

X1,Y1:X2,Y2:X3,Y3

3x3 Mesh

X1,Y1:X2,Y2:X3,Y3:X4,Y4:X5,Y5:X6,Y6:X7,Y7:X8,Y8:X9,Y9

Example(s)

In this example, the SPL wizard will run using the 3 Point Plane configuration at the points 4,7; 200,12; and 100,220

Leveling Positions-ss-ex.png