Changes

Jump to: navigation, search

SETTINGS/Printer/Print Leveling/Machine Settings/Leveling Solution

220 bytes added, 22:20, 1 August 2017
no edit summary
|The print leveling algorithm to use when the [[Options/Software Print Leveling|Software Print Leveling]] wizard runs.
Note: This section (Print Recovery) is not === Restrictions === *Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.|Available as presets only:
*3-Point Plane
*7-Point Disk
*13-Point Disk*3x3 Mesh|
=== 3-Point Plane ===
[[File:{{SUBPAGENAME}}-ss-ex2.png]]
 
=== 3x3 Mesh ===
 
In this example, the printer will use a 3x3 grid pattern (9 total points) to probe the bed during the [[Options/Software Print Leveling|Software Print Leveling]] wizard.
 
[[File:{{SUBPAGENAME}}-ss-ex3.png]]
Retrieved from "http://wiki.mattercontrol.com/Special:MobileDiff/3804...4057"

Navigation menu