Difference between revisions of "SETTINGS/Printer/Print Leveling/Machine Settings/Require Leveling To Print"

From MatterControl Manual
Jump to: navigation, search
 
Line 7: Line 7:
 
=== Restrictions ===
 
=== Restrictions ===
  
*This section (Print Recovery) is not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.|*Boolean|
+
*Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as only one form of leveling can be used at a time.|*Boolean|
  
 
=== Boolean ===
 
=== Boolean ===

Latest revision as of 18:34, 6 December 2016

A screenshot of the Require Leveling To Print setting as seen in MatterControl's SETTINGS pane.

Function

The printer requires print leveling to run correctly.

Enabling this function will hide the On/Off switch used to toggle Software Print Leveling in the OPTIONS menu.

Restrictions

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Require Leveling To Print-ss-ex.png

The check box is unchecked to leave the function unused.

Require Leveling To Print-ss-ex1.png