Lower-Deploy

From MatterControl Manual

< SETTINGS‎ | Printer‎ | Print Leveling‎ | Probe Settings

Revision as of 13:47, 2 August 2017 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

A screenshot of the Lower-Deploy setting as seen in MatterControl's SETTINGS pane.

Function

The angle of the servo motor that lowers or deploys the Z probe.

Parameters

Degrees

Example(s)

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Print_Leveling/Probe_Settings/Lower-Deploy&oldid=4079"