Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/Use Automatic Z Probe"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.|...")
(No difference)

Revision as of 10:36, 1 August 2017

A screenshot of the Use Automatic Z Probe setting as seen in MatterControl's SETTINGS pane.

Function

Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.

Parameters

  • Boolean

Example(s)

Use Automatic Z Probe-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Print_Leveling/Probe_Settings/Use_Automatic_Z_Probe&oldid=4004"