Use Automatic Z Probe

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Print Leveling‎ | Probe Settings
Revision as of 10:36, 1 August 2017 by Tanderson (Talk | contribs) (Created page with "{{Slice Settings |Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.|...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Use Automatic Z Probe setting as seen in MatterControl's SETTINGS pane.

Function

Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.

Parameters

  • Boolean

Example(s)

Use Automatic Z Probe-ss-ex.png
Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Print_Leveling/Probe_Settings/Use_Automatic_Z_Probe&oldid=4004"