Use Automatic Z Probe

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Print Leveling‎ | Probe Settings
Revision as of 14:45, 2 August 2017 by MatterHackers (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Use Automatic Z Probe setting as seen in MatterControl's SETTINGS pane.


Enable this if your printer has hardware support for G30 (automatic bed probing) and you want to use it rather than manually measuring the probe positions.


  • Boolean



The check box is checked to use the function.

Use Automatic Z Probe-ss-ex.png

The check box is unchecked to leave the function unused.

Use Automatic Z Probe-ss-ex1.png