Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/XY Offset"
From MatterControl Manual
< SETTINGS | Printer | Print Leveling | Probe Settings
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |Coordinates of the Z probe, | + | |Coordinates of the Z probe, relative to the nozzle, in millimeters.|*millimeters (mm)|In this example, the probe is 23 millimeters to the right of and exactly at the same depth as the nozzle.}} |
Latest revision as of 14:51, 2 August 2017
Function
Coordinates of the Z probe, relative to the nozzle, in millimeters.
Parameters
- millimeters (mm)
Example(s)
In this example, the probe is 23 millimeters to the right of and exactly at the same depth as the nozzle.
