Difference between revisions of "SETTINGS/Printer/Print Leveling/Probe Settings/Z Offset"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
{{Slice Settings
+
{{Slice Settings1
  
 
|The thickness of the paper (or other calibration device) used to perform manual bed probe.
 
|The thickness of the paper (or other calibration device) used to perform manual bed probe.

Revision as of 15:47, 1 August 2017

A screenshot of the Z Offset setting as seen in MatterControl's SETTINGS pane.

Function

The thickness of the paper (or other calibration device) used to perform manual bed probe.

Restrictions

Parameters

  • millimeters (mm)

Example(s)

mm

In this example, the paper to be used during the manual bed probe is 0.1 mm thick.

Z Offset1-ss-ex.png