Z Offset
From MatterControl Manual
< SETTINGS | Printer | Print Leveling | Probe Settings
Revision as of 12:31, 13 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The thickness of the paper (or other calibration device) used to perform manual bed probe.|*millimeters (mm)| === mm === In this example, the paper to be...")
Function
The thickness of the paper (or other calibration device) used to perform manual bed probe.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the paper to be used during the manual bed probe is 0.1 mm thick.
