Z Offset
From MatterControl Manual
< SETTINGS | Printer | Print Leveling | Probe Settings
Revision as of 14:53, 2 August 2017 by MatterHackers (Talk | contribs)
Function
The vertical distance from the Z probe to the nozzle, in millimeters.
For manual probing, this is thickness of the paper (or other calibration device).
Restrictions
- Not shown when Has Hardware Leveling is enabled.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the Z probe is 1.6mm higher than the nozzle.
