Difference between revisions of "SETTINGS/Printer/Print Recovery/Recover Settings/Enable Recovery"

Revision as of 18:21, 6 December 2016

A screenshot of the Enable Recovery setting as seen in MatterControl's SETTINGS pane.

If enabled, MatterControl will attempt to recover a print in the event of a failure such as broken connection or loss of power.

Note: Not shown when Has Hardware Leveling is enabled as G29 procedures could interfere with a partially-completed print.

The check box is checked to use the function.

The check box is unchecked to leave the function unused.

@@ Line 1: / Line 1: @@
 {{Slice Settings
-|If enabled, MatterControl will attempt to recover a print in the event of a failure such as broken connection or loss of power.|*Boolean|
+|If enabled, MatterControl will attempt to recover a print in the event of a failure such as broken connection or loss of power.
+Note: Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print.|*Boolean|
 === Boolean ===