Enable Recovery
From MatterControl Manual
< SETTINGS | Printer | Print Recovery | Recover Settings
Revision as of 18:31, 6 December 2016 by MatterHackers (Talk | contribs)
Function
If enabled, MatterControl will attempt to recover a print in the event of a failure such as broken connection or loss of power.
Restrictions
- This section (Print Recovery) is not shown when Has Hardware Leveling is enabled as G29 procedures could interfere with a partially-completed print.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.
