|Function text|*parameters text|The speed at which the nozzle will move when recovering a failed print, for one layer.
=== Parameter 1 Restrictions ===
Caption for Example for Parameter 1*This section (Print Recovery) is not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print.}}|*millimeters per second (mm/s)|
=== Parameter 2 mm/s ===
Caption for In this example for Parameter 2the nozzle will move at 10 mm/s whilst printing the layer the printer was on when it failed. [[File:{{SUBPAGENAME}}-ss-ex1.png]][[Category:Incomplete]]