Open main menu

Changes

SETTINGS/Printer/Print Recovery/Recover Settings/XY Homing Position

409 bytes added, 01:32, 7 December 2016
no edit summary
{{Slice Settings
|Function text|*parameters text|Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print.
=== Parameter 1 Restrictions ===
Caption for Example for Parameter 1*Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print.}}*Not shown when [[SETTINGS/Printer/Features/Behavior/Home Z Max|Home Z Max]] is enabled as homing up would not interfere with a partially-completed print.|*millimeters (mm)|
=== Parameter 2 mm ===
Caption for In this example , the best coordinates on the X and Y axes for Parameter 2the printer to home the Z axis are 185, 190. [[File:{{SUBPAGENAME}}-ss-ex1.png]] [[Category:Incomplete]]