Difference between revisions of "SETTINGS/Printer/Print Recovery/Recover Settings/XY Homing Position"
From MatterControl Manual
< SETTINGS | Printer | Print Recovery | Recover Settings
| Line 3: | Line 3: | ||
|Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print. | |Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print. | ||
| − | + | === Restrictions === | |
| − | + | *Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print. | |
| + | *Not shown when [[SETTINGS/Printer/Features/Behavior/Home Z Max|Home Z Max]] is enabled as homing up would not interfere with a partially-completed print.|*millimeters (mm)| | ||
=== mm === | === mm === | ||
In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.}} | In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.}} | ||
Latest revision as of 18:32, 6 December 2016
Function
Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print.
Restrictions
- Not shown when Has Hardware Leveling is enabled as G29 procedures could interfere with a partially-completed print.
- Not shown when Home Z Max is enabled as homing up would not interfere with a partially-completed print.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.
