|Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print.
Note: Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print.=== Restrictions ===
Note: *Not shown when [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as G29 procedures could interfere with a partially-completed print.*Not shown when [[SETTINGS/Printer/Features/Behavior/Home Z Max|Home Z Max]] is enabled as homing up would not interfere with a partially-completed print.|*millimeters (mm)|
=== mm ===
In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.}}
