XY Homing Position

A screenshot of the XY Homing Position setting as seen in MatterControl's SETTINGS pane.

Function

Specify the X and Y coordinates where the printer can home the Z axis without interfering with the partially-completed print.

Restrictions

• Not shown when Has Hardware Leveling is enabled as G29 procedures could interfere with a partially-completed print.
• Not shown when Home Z Max is enabled as homing up would not interfere with a partially-completed print.

Parameters

• millimeters (mm)

Example(s)

mm

In this example, the best coordinates on the X and Y axes for the printer to home the Z axis are 185, 190.