Changes

SETTINGS/General/Speed/Speed for Non-Print Moves/Travel

243 bytes added, 22:28, 21 December 2015
Created page with "{{Slice Settings |Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)| === mm/s === In the example below, the nozzle will travel..."
{{Slice Settings

|Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)|

=== mm/s ===

In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.}}