Slice Settings

From MatterControl Manual
Revision as of 16:22, 18 December 2015 by MatterHackers (Talk | contribs)

Jump to: navigation, search
This line is the screenshot of the settings pane with the active setting highlighted or circled.
A screenshot of the 'Slice Settings' setting as seen in MatterControl's Settings pane.

Function

Number 1 is the function as described in the help text, and/or Taylor's slicer settings article text {{{1}}}

Parameters

The format of input accepted. For example, layer height takes count or mm. {{{2}}}

Example(s)

An example of each of the parameters, including a screenshot. The first will be included in this template, and any subsequent parameters will need to be inserted on the actual page. See Perimeters for an example of this in practice. {{{3}}}