Changes

Template:Slice Settings1

1,189 bytes added, 23:32, 18 December 2015
Created page with "<noinclude>'''This is a duplicate template for use with duplicate slice settings (i.e. General -> Speed -> Support Material and Filament -> Extrusion -> Support Material). The..."
<noinclude>'''This is a duplicate template for use with duplicate slice settings (i.e. General -> Speed -> Support Material and Filament -> Extrusion -> Support Material). The associated file names have a 1 at the end of the base; that is the only difference. This and [[Template:Slice Settings]] should be edited at the same time.'''</noinclude>__NOTOC__{{DISPLAYTITLE:{{SUBPAGENAME}}}}[[File:{{SUBPAGENAME}}1-ss.png|right|frame|<center>A screenshot of the '{{SUBPAGENAME}}' setting as seen in MatterControl's Settings pane.</center>]]
== Function ==
<noinclude>Number 1 is the function as described in the help text, and/or Taylor's slicer settings article text</noinclude>
{{{1}}}

== Parameters ==
<noinclude>The format of input accepted. For example, layer height takes count or mm.</noinclude>
{{{2}}}

== Example(s) ==
<noinclude>An example of each of the parameters, including a screenshot. The first will be included in this template, and any subsequent parameters will need to be inserted on the actual page. See [[Perimeters]] for an example of this in practice.</noinclude>
{{{3}}}

[[File:{{SUBPAGENAME}}1-ss-ex.png|none]]

[[Category:Slice Settings]]
[[Category:MatterSlice]]