Support Material

A screenshot of the Support Material setting as seen in MatterControl's SETTINGS pane.

Function

A modifier of the width of the extrusion when printing support material.

Parameters

• millimeters (mm)
• percent (%)

Set to 0 to use default extrusion width.

Example(s)

mm

In this example, the adjusted nozzle diameter for the support material extrusion will be 0.3 mm.

%

In this example, the nozzle size set under Printer settings will be modified by 115%. For this example, the nozzle size was 0.4 mm, so the adjusted size will be 0.46 mm.