Changes

Jump to: navigation, search

Overview

17 bytes added, 23:02, 13 January 2016
Movement Control
The printer's bed and extruder can be heated manually by typing in a value in the entry box. There are also presets for the extruder and bed temperatures. For the extruder temperature, the PLA and ABS presets are 190ºC and 220ºC respectively. For the bed temperature, the PLA and ABS presets are 70ºC and 130ºC respectively. The Target and Actual temperatures of the extruder are displayed to the left of the box. The current temperatures of the bed and extruder are displayed with two white icons at the top-right corner of the interface.
=== [[Controls/Movement|Movement Control]] ===
Movement controls for the X, Y, and Z axes are located below the Temperature Settings. The ALL, X, Y, and Z icons
icons.
The movement control section disappears during the printing process and is replaced by the Tuning Adjustments section.
== Setup and Calibration ==

Navigation menu