Changes

Jump to: navigation, search

Automatic Print Leveling

49 bytes added, 01:00, 3 February 2016
→‎Firmware Changes:
<code>#define DEFAULT_ZJERK 0.2 // (mm/sec) can't be set to 0 for bed leveling to work.</code>
Or add the following to your [[Settings/Printer/Custom G-Code/Start G-Code|start G-codeCode]]:
<code> M205 Z.2</code>
Retrieved from "http://wiki.mattercontrol.com/Special:MobileDiff/2247"

Navigation menu