2,552
edits
Changes
no edit summary
Certain printers do not accept [http://reprap.org/wiki/G-code#G0_.26_G1:_Move G0] as a valid command for movement, so MatterControl sends the more common [http://reprap.org/wiki/G-code#G0_.26_G1:_Move G1] command instead.
Starting in version 1.6, the '''[[Use G0|Settings/General/Output Options/File Settings/Use G0|Use G0]] ''' setting will allow for the use of G0 if desired.
=== Coordinate Truncation ===
