View source for SETTINGS/General/Speed/Modifiers/First Layer Speed

{{Slice Settings

|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified. This affects the first layer of the print as well as the first layer of the raft, if there is one.|*millimeters per second (mm/s)
*percent [of [[Settings/General/Speed/Speed for Infill/Infill|Infill speed]]] (%)

== [[Custom G-Code Variables|Custom G-Code Variable]] ==

<code>first_layer_speed</code>|

=== mm/s ===

In this example, the first layer will print at 20 mm/s.}}

=== % ===

In this example, the first layer will print at 35% of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]