View source for SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature

{{Slice Settings

|The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.

Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].

=== Restrictions ===

*Not shown if [[SETTINGS/Printer/Features/Hardware/Has Heated Bed|Has Heated Bed]] is disabled.|*degrees Celsius

== [[Custom G-Code Variables|Custom G-Code Variable]] ==

<code>bed_remove_part_temperature</code>|

=== degrees ===

In this example, the bed will cool to 55 degrees after the print as specified in the [[Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}