View source for SETTINGS/Printer/Print Leveling/Probe Settings/XY Offset

← SETTINGS/Printer/Print Leveling/Probe Settings/XY Offset

Jump to: navigation, search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, Administrators.

You can view and copy the source of this page.

{{Slice Settings

|Coordinates of the Z probe, from the extruder, in X and Y.|*millimeters (mm)|In this example, the probe is 23 millimeters to the right of and exactly at the same depth as the nozzle.}}

Template used on this page:

Template:Slice Settings (view source)

Return to SETTINGS/Printer/Print Leveling/Probe Settings/XY Offset.

Retrieved from "http://wiki.mattercontrol.com/SETTINGS/Printer/Print_Leveling/Probe_Settings/XY_Offset"

Navigation menu