View source for SETTINGS/General/Speed/Speed for Infill/Top Solid Infill

{{Slice Settings

|The speed at which the [[Slice_Settings/General/Layers-Surface/Outer_Surface_-_Top_%26_Bottom/Top_Solid_Layers|top solid layers]] will print.|*millimeters per second (mm/s)
*percentage [of [[Slice_Settings/General/Speed/Speed_for_Infill/Infill|Infill speed]]] (%)|

=== mm/s ===

In this example, the top solid infill will print at 30 mm/s.}}

=== % ===

In this example, the top solid infill will print at 50% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 20 mm/s.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]