View source for SETTINGS/General/Speed/Speed for Perimeters/Outside Perimeter

{{Slice Settings

|The speed at which outside, external, or the otherwise visible perimeters will print.|*millimeters per second (mm/s)
*percent [of [[Slice_Settings/General/Speed/Speed_for_Perimeters/Inside_Perimeters|inside perimeters]]] (%).|

=== mm/s ===

In this example, the outside perimeters will print at 25 mm/s.}}

=== % ===

In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]