View source for SETTINGS/General/Support Material/Support Material/Support Type

{{Migrated|slice-settings/support/advanced#support-type}}
{{Slice Settings

|The pattern to draw for the generation of support material.|Available as presets only:

*GRID
*LINES|

For these examples, [http://104.154.32.252/images/7/72/Support_test.stl Support_test.stl] is the model used.

=== GRID ===

The GRID support material type, shown here in [[Layer View#3D|3D Layer View]] at full height before the overhang.}}

=== LINES ===

The LINES support material type, shown here in [[Layer View#3D|3D Layer View]] at full height before the overhang.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]