Difference between revisions of "SETTINGS/Filament/Material/Properties/Diameter"
From MatterControl Manual
< SETTINGS | Filament | Material | Properties
| Line 3: | Line 3: | ||
|The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.|*millimeters (mm) | |The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.|*millimeters (mm) | ||
| − | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>filament_diameter</code>| | <code>filament_diameter</code>| | ||
Revision as of 11:59, 13 January 2016
Function
The actual diameter of the filament used for printing. Measure 5 times with calipers, throw out the top and bottom, and average the remaining 3.
Parameters
- millimeters (mm)
Custom G-Code Variable
filament_diameter
Example(s)
mm
In this example, the filament diameter is 1.75 mm.
