Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Extruder Temperatures
Line 5: | Line 5: | ||
This temperature can be adjusted during a print by changing the value in the [[Controls/Temperature/Extruder Temperature|Extruder Temperature Target field]].|*degrees Celsius | This temperature can be adjusted during a print by changing the value in the [[Controls/Temperature/Extruder Temperature|Extruder Temperature Target field]].|*degrees Celsius | ||
− | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>temperature</code>| | <code>temperature</code>| |
Revision as of 12:59, 13 January 2016
Function
The target temperature the extruder will attempt to reach during the print.
This temperature can be adjusted during a print by changing the value in the Extruder Temperature Target field.
Parameters
- degrees Celsius
Custom G-Code Variable
temperature
Example(s)
degrees
In this example, the extruder will attempt to reach 218 for the duration of the print.