Difference between revisions of "SETTINGS/Printer/Custom G-Code/Cancel G-Code"
From MatterControl Manual
< SETTINGS | Printer | Custom G-Code
(Created page with "{{Slice Settings |G-Code to run when a print is canceled.|*G-Code Will accept Custom G-Code variables.| === G-Code === In thi...") |
(No difference)
|
Revision as of 14:07, 13 January 2016
Function
G-Code to run when a print is canceled.
Parameters
- G-Code
Will accept Custom G-Code variables.
Example(s)
G-Code
In this example, when the 'Cancel' button is pressed during a print, the printer will set the extruder temperature to 0 (M104 S0), set the heated bed temperature to 0 (M140 S0), and home (G28).
