Difference between revisions of "SETTINGS/Printer/Connection/Details/Port"
From MatterControl Manual
< SETTINGS | Printer | Connection | Details
(Created page with "{{Slice Settings |The TCP port to be used to connect to the printer over the network. |*Port Number| }}") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Slice Settings | {{Slice Settings | ||
| − | |The TCP port to be used to connect to the printer over the network. | + | |The TCP port to be used to connect to the printer over the network. |
| − | }} | + | This setting only appears if you have [[SETTINGS/Printer/Features/Hardware/Networked_Printing|Networked Printing]] enabled.|*Port Number| |
| + | |||
| + | In this example, port 23 at address 192.168.1.69 will be used.}} | ||
Latest revision as of 12:45, 1 August 2017
Function
The TCP port to be used to connect to the printer over the network.
This setting only appears if you have Networked Printing enabled.
Parameters
- Port Number
Example(s)
In this example, port 23 at address 192.168.1.69 will be used.
