Difference between revisions of "SETTINGS/General/Speed/Speed for Perimeters/Inside Perimeters"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Perimeters
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Migrated|slice-settings/speed/speed#inside-perimeters}} | ||
{{Slice Settings | {{Slice Settings | ||
|The speed at which inside perimeters will print.|*millimeters per second (mm/s) | |The speed at which inside perimeters will print.|*millimeters per second (mm/s) | ||
| − | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>perimeter_speed</code>| | <code>perimeter_speed</code>| | ||
Latest revision as of 15:46, 12 September 2018
|
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
The speed at which inside perimeters will print.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
perimeter_speed
Example(s)
mm/s
In this case, the inside perimeters will be printed at 40 mm/s.
