Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature"

Latest revision as of 18:45, 7 January 2019

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/advanced#bed-remove-part-temperature.

A screenshot of the Bed Remove Part Temperature setting as seen in MatterControl's SETTINGS pane.

The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom G-Code variable.

bed_remove_part_temperature

In this example, the bed will cool to 55 degrees after the print as specified in the End G-Code field, assuming the variable is used.

@@ Line 1: / Line 1: @@
+{{Migrated|slice-settings/filament/advanced#bed-remove-part-temperature}}
 {{Slice Settings
 |The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
-Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].|*degrees Celsius
+Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].
+=== Restrictions ===
+*Not shown if [[SETTINGS/Printer/Features/Hardware/Has Heated Bed|Has Heated Bed]] is disabled.|*degrees Celsius
 == [[Custom G-Code Variables|Custom G-Code Variable]] ==
@@ Line 11: / Line 16: @@
 === degrees ===
-In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}
+In this example, the bed will cool to 55 degrees after the print as specified in the [[Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}