Difference between revisions of "SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters"
m (MatterHackers moved page Settings/Filament/Extrusion/Extrusion Width/Outside Perimeters to SETTINGS/Filament/Extrusion/Extrusion Width/Outside Perimeters) |
|||
| Line 1: | Line 1: | ||
| + | {{Migrated|slice-settings/filament/advanced#outside-perimeters}} | ||
{{Slice Settings | {{Slice Settings | ||
Latest revision as of 17:25, 5 April 2019
|
|
Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/. |
Function
A modifier of the width of the extrusion when printing outside perimeters.
Can be useful to fine-adjust actual print size when objects print larger or smaller than specified in the digital model.
Parameters
- millimeters (mm)
- percent (%)
Set to 0 to use default extrusion width.
Example(s)
mm
In this example, the adjusted nozzle diameter for the first layer extrusion will be 0.3 mm.
%
In this example, the nozzle size set under Printer settings will be modified by 90%. For this example, the nozzle size was 0.5 mm, so the adjusted size will be 0.45 mm.
