Difference between revisions of "SETTINGS/Filament/Temperatures/Extruder Temperatures/Extruder Wipe Temperature"
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Extruder Temperatures
| Line 5: | Line 5: | ||
Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius | Used only by Custom G-Code fields as a [[Custom GCode Variables|Custom GCode variable]].|*degrees Celsius | ||
| − | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>extruder_wipe_temperature</code>| | <code>extruder_wipe_temperature</code>| | ||
Revision as of 11:59, 13 January 2016
Function
The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.
Used only by Custom G-Code fields as a Custom GCode variable.
Parameters
- degrees Celsius
Custom G-Code Variable
extruder_wipe_temperature
Example(s)
degrees
In this example, the nozzle will heat to 145 degrees as specified in the Start GCode field, assuming the variable is used.
