Difference between revisions of "SETTINGS/Filament/Retraction/While Printing/Speed"
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
| Line 3: | Line 3: | ||
|The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s) | |The speed at which filament will retract and re-extrude until the next print move.|*millimeters per second (mm/s) | ||
| − | == [[Custom | + | == [[Custom G-Code Variables|Custom G-Code Variable]] == |
<code>retract_speed</code>| | <code>retract_speed</code>| | ||
Revision as of 11:59, 13 January 2016
Function
The speed at which filament will retract and re-extrude until the next print move.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
retract_speed
Example(s)
mm/s
In this example, filament will retract and re-extrude at 110 mm/s until the next print move.
