Difference between revisions of "SETTINGS/Printer/Custom G-Code/After Tool Change G-Code"
From MatterControl Manual
< SETTINGS | Printer | Custom G-Code
(Created page with "{{Slice Settings |G-Code to be run after every tool change (T0, T1, T2, etc.).|*G-Code Will accept Custom G-Code variables.| === G-Code === In...") |
m (MatterHackers moved page Slice Settings/Printer/Custom G-Code/Tool Change G-Code to Settings/Printer/Custom G-Code/Tool Change G-Code without leaving a redirect) |
(No difference)
| |
Revision as of 12:56, 20 January 2016
Function
G-Code to be run after every tool change (T0, T1, T2, etc.).
Parameters
- G-Code
Will accept Custom G-Code variables.
Example(s)
G-Code
In this example, the printer will run a series of G-Code commands to wipe the nozzle after every T0, T1, T2, etc. during the print.
