Difference between revisions of "SETTINGS/Printer/Custom G-Code"

From MatterControl Manual
Jump to: navigation, search
Line 9: Line 9:
 
*[[Settings/Printer/Custom G-Code/Start G-Code|Start G-Code]]
 
*[[Settings/Printer/Custom G-Code/Start G-Code|Start G-Code]]
 
*[[Settings/Printer/Custom G-Code/End G-Code|End G-Code]]
 
*[[Settings/Printer/Custom G-Code/End G-Code|End G-Code]]
*[[Settings/Printer/Custom G-Code/Layer Change G-Code]]
+
*[[Settings/Printer/Custom G-Code/Layer Change G-Code|Layer Change G-Code]]
 
*[[Settings/Printer/Custom G-Code/Before Tool Change G-Code|Before Tool Change G-Code]]
 
*[[Settings/Printer/Custom G-Code/Before Tool Change G-Code|Before Tool Change G-Code]]
 
*[[Settings/Printer/Custom G-Code/After Tool Change G-Code|After Tool Change G-Code]]
 
*[[Settings/Printer/Custom G-Code/After Tool Change G-Code|After Tool Change G-Code]]

Revision as of 11:45, 15 November 2016

The Custom G-Code sub-category as shown in the MatterControl SETTINGS pane.

Custom G-Code is a sub-category of Printer settings which deal with the various fields into which custom G-Code can be inserted at different places during the print and on button clicks.

All G-Code must be uppercase to function properly.

NOTE: All Custom G-Code is subject to filtering rules.

Fields