Difference between revisions of "SETTINGS/Printer/Custom G-Code/Layer Change G-Code"
From MatterControl Manual
< SETTINGS | Printer | Custom G-Code
(Created page with "{{Slice Settings |G-Code to be run at the beginning of every layer. '''NOTE:''' All Custom G-Code is subject to filtering rules.|*G-Code *Custom_G-Cod...") |
(No difference)
|
Revision as of 17:52, 22 November 2016
Function
G-Code to be run at the beginning of every layer.
NOTE: All Custom G-Code is subject to filtering rules.
Parameters
- G-Code
- Custom G-Code variables
All G-Code must be uppercase to function properly.
Example(s)
G-Code
In this example, the printer will insert a comment indicating the number of the layer at the beginning of every layer of the print.
