Z Lift
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
Revision as of 09:06, 15 November 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/Filament/Retraction/Retraction/Z Lift to Settings/Filament/Retraction/While Printing/Z Lift)
Function
The distance the nozzle will be lifted during non-printing moves (after each retraction happens). This ensures that the nozzle will not be dragged across the top of the object.
Parameters
- millimeters (mm)
Can be zero.
Example(s)
mm
In this example, the nozzle will lift 0.3 mm after every retraction.