OPTIONS/EEProm

With the EEProm Settings you can adjust many of the settings that your printer uses by default. MatterControl can set EEProm settings for both Marlin and Repatier firmware.

File:Eeprom1.png

EEPROM settings can be found under the Configuration tab

The settings window for Marlin firmware

Example

Setting The Steps Per mm

This is a great way to fix problems you have with you printer not moving the distance you expect, or having your parts come out with incorrect dimensions.

File:Eeprom2.png

1. Go to 'Advanced Controls'
2. Click on the 'CONFIGURATION' tab File:Eeprom3.png
3. Connect to your printer
4. In the 'EEProm Settings' click on 'CONFIGURE' File:Eeprom4.png
5. Change the 'Steps per mm:' to correct for any discrepancy you find in your movement distances. File:Eeprom5.png

Equation

Here is the equation you can use to find correct values:

Desired_Steps_Per_mm = Actual_Steps_Per_mm * Current_Steps_Per_mm / Desired_Distance

So if your x was set to 80 and you only moved 97mm when trying to move 100mm, you would put in 97 * 80 / 100 And set the X Steps Per mm to 77.6