Travel
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Non-Print Moves
Revision as of 12:55, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/General/Speed/Speed for Non-Print Moves/Travel to Settings/General/Speed/Speed for Non-Print Moves/Travel without leaving a redirect)
Function
The speed at which the nozzle will move when not extruding material.
Parameters
- millimeters per second (mm/s)
Custom G-Code Variable
travel_speed
Example(s)
mm/s
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.
